こちらの製品はDADISICKが独自に開発・製造・販売しているブランド製品です。
安定した高品質の製品を提供し、迅速な納品を保証します。
dadisickは製品交換サービスを提供します
- ABB の代替品
- Autonics の代替品
- BALLUFF の代替品
- BANNER の代替品
- KEYENCE の代替品
- CONTRINEX の代替品
- Datasensing の代替品
- Euchner の代替品
- HTM sensors の代替品
- IDEC の代替品
- IFM の代替品
- IPF ELECTRONIC の代替品
ホームページ / 全て / Safety Products / Laser Distance Displacement Sensor /
Laser measurement distance｜Laser Ranging Sensor｜DADISICK
Laser measurement distance｜Laser Ranging Sensor｜DADISICK
| カタログ | Laser Distance Displacement Sensor |
|---|---|
| ブランド | DADISICK |
| 製品の規格 | DA-Y & DB-Y Series |
| Measuring frequency: | 1Hz-40Hz |
| Communication interface: | RS232/RS485 (switchable) |
| Laser type: | Class II, 660±15nm, ≤1mW |
| Measurement resolution: | 1mm |
| Power supply: | DC15~30V |
| Power consumption: | <3.0W |
| Protection grade: | IP67 |
| 更新時間 | 2024/11/21 |
詳細情報
DADISICK Laser ranging sensor
DA-Y & DB-Y Series
|
Laser Ranging Sensor Models comparison
|
||||||
Type A | ||||||
Models | DA-Y10 | DA-Y20 | DA-Y30 | DA-Y50 | DA-Y100 | |
Measuring range | 0.2-10m | 0.2-20m | 0.2-30m | 0.2-50m | 0.2-100m |
|
Output mode | Digital quantity & switch quantity | |||||
Type B | ||||||
Models | DB-Y10 | DB-Y20 | DB-Y30 | DB-Y50 | DB-Y100 | |
Measuring range | 0.2-10m | 0.2-20m | 0.2-30m | 0.2-50m | 0.2-100m | |
Voltage/current output | Can be set to 0~5V / 0~10V / 4~20mA / 0~20mA /0~24mA output *Note 2 | |||||
Voltage output error | 0.2%+0.5mV | |||||
Current output error | 0.2%+0.005mA | |||||
Output mode | Digital quantity, switch quantity, analog quantity | |||||
|
Specification
|
||||||
Communication interface | RS232/RS485 (switchable) | |||||
Measuring frequency | 1Hz-40Hz |
|||||
Laser type | Class II, 660±15nm, ≤1mW | |||||
Measurement resolution | 1mm | |||||
Measurement error | ±(2mm+d * one ten thousandth) *Note 1 | |||||
Indicator light | Red laser | |||||
Spot size | @1m∅6mm; @10m∅8mm; @20m∅12mm; @30m∅16mm; | |||||
Display | 128x32 dot matrix screen | |||||
Backlight off time | 30 minutes (can be set to normally on) | |||||
Operating mode | Off measurement, continuous measurement | |||||
Transistor switch output | 2 channels (cannot exceed DC36V 0.5A) *Note 3 | |||||
Power supply | DC15~30V | |||||
Power consumption | ＜3.0W | |||||
Protection grade | IP67 | |||||
Shell material | Die-cast zinc alloy | |||||
Working temperature | -10°C~50°C | |||||
Storage temperature and humidity | -20°C~60°C, 20%~85%RH | |||||
Overheating protection | When the body temperature is higher than 70°C, the measurement will be shut down and when the temperature is lower than 70°C, the measurement will be resumed. | |||||
Dimension | 88.45x40x59.3mm (including connection base) | |||||
Notes | *Note 1: When [Speed Level] is 1. "d" represents the actual distance. In harsh environments, such as when the sun is too strong and the ambient temperature fluctuates too much, there will be a large error in the measurement results. In this case, the effect is better when used with a target reflector. *Note 2: Current and voltage can' t be output at the same time. *Note 3: If the external DC output of the transistor switch exceeds the limited voltage or current, it may cause permanent damage to the instrument. | |||||
DIMENSION
WIRING DIAGRAM
RS485 Wiring Method
RS232 Wiring Method
DOCUMENTS & DOWNLOADS
CATALOGUE
評価
- 読み込んでいます...
求める品の情報をご連絡ください
- お名前
- *題名
- *内容
産業オートメーション セキュリティ ソリューション
光学、電気、機械製品の製品技術研究、開発、生産、販売、代理店を専門とする科学技術企業です。オプトエレクトロニクス製品の専門メーカーです。....詳細
