こちらの製品はDADISICKが独自に開発・製造・販売しているブランド製品です。
安定した高品質の製品を提供し、迅速な納品を保証します。
-
dadisickは製品交換サービスを提供します
- ABB の代替品
- Autonics の代替品
- BALLUFF の代替品
- BANNER の代替品
- KEYENCE の代替品
- CONTRINEX の代替品
- Datasensing の代替品
- Euchner の代替品
- HTM sensors の代替品
- IDEC の代替品
- IFM の代替品
- IPF ELECTRONIC の代替品
- Leuze の代替品
-
Warehouse and Logistics Automation
Optical Data Transmission Module
What is Optical Data Transmission?
The ST100 Series Optical Data Transmission Sensor is an optical data transmission module that uses spatial light as the transmission medium. Its core components include optics, mechanics, circuitry, and software systems. During operation, the sensor converts the data stream from the host computer into laser pulse signals, which are emitted outward by the laser emitter. These laser pulses propagate through free space to the receiver. The receiver detects the incoming light signals, converts them into electrical signals, and transmits the data stream back to the host computer. This process enables efficient data transmission.
Optical Link Characteristics
The ST100 Series Optical Data Transmission Sensor uses infrared lasers for data transmission, employing two laser wavelengths: 785nm and 850nm, for mutual data interaction. The original spot size of each laser is approximately 5mm, with a beam divergence angle of 1°, and the corresponding receiver field of view angle is 1.5°.
Main Applications
The ST100 Series Optical Data Transmission Sensor utilizes optical transmission technology, eliminating the need for physical data transmission cables. As a result, it is particularly suitable for environments where the use of cables is impractical, such as in confined spaces or complex environments. Its main applications include: smart warehousing, overhead cranes, reciprocating transport systems, port automation, stacker cranes, rail cars, and more.
ST100 Series and DS Series Interference-Free Parallel Operation
As storage and retrieval systems increasingly rely on dynamic calculation of position data, pre-calculated position drives can be optimized for high speed or low power consumption, depending on throughput requirements.
The ST100 Series laser-based broadband data transmission module provides additional benefits by offering parallel real-time images from aisles for position data. This aids in fault analysis and correction, as well as system optimization. DADISICK's new ST100 Series Optical Data Transmission Module enables protocol-free, high-speed Ethernet communication with bandwidth up to 100 Mbit/s, making it ideal for internal logistics applications. The module also offers diagnostic capabilities via a display and digital outputs, providing a comprehensive solution for fast debugging and high operational availability.
This module is suitable for wireless data transmission to storage and retrieval devices in automatic high-bay warehouses or transfer vehicles. With a bandwidth of 100 Mbit/s, it can handle large amounts of data, such as diagnostic data generated by cameras installed on storage and retrieval devices for monitoring purposes. When combined with the DS Series Long Distance Laser Ranging Sensor, it offers enhanced functionality.
The ST100 Series Optical Data Transmission Module and DS Series Long Distance Optical Distance Sensors form a powerful suite for linear positioning, offering advanced and investment-secure positioning solutions for storage and retrieval systems from a single source. The 100 Mbit/s high Ethernet data transmission bandwidth enables the implementation of additional availability optimization options.
Diagram Description：
① Distance Sensor
② Reflector Plate
H (Minimum Distance)
Smax (Maximum Travel Distance)
③ ST100 Device No.1
④ ST100 Device No.2
③ ST100 Device No.1
④ ST100 Device No.2
DS Series Long-Distance Laser Rangefinder
Long-Distance Laser Rangefinder Function of the DS Series
The DS Series Long Distance Laser Rangender consists of a laser emitter, an optical receiving device, and an internal processing circuit and software system. The sensor emits a laser beam, which is reflected by a reflector and received by the optical receiving device. The built-in evaluation and measurement unit uses the Time of Flight (TOF) method with phase correlation to accurately calculate the distance between the sensor and the reflector. During the measurement, the reflector or equipment can move linearly along the laser beam path, and the sensor continuously tracks and calculates the distance. The measurement results are transmitted through a data interface.
Optical Distance Sensors Products List
DADISICK specializes in providing advanced sensor solutions for automation systems in warehouses, ports, and docks. Our sensors are widely used in mobile equipment such as AMRs, AGVs, RTGs, and bridge/gantry cranes, as well as in automation systems like AS/RS. With precise navigation and positioning, reliable obstacle detection, efficient data transmission, and comprehensive safety protection, DADISICK sensors significantly enhance system performance and safety, enabling more efficient material handling. Whether for forklifts, autonomous vehicles, or semi-autonomous vehicles, we offer tailored sensor solutions to meet a wide range of application needs.
| 絵 | モデル | 製品の説明 | もっと見る |
|---|
FAQ
Can the DS Series Laser Distance Sensors be used in parallel with Optical Data Transmission Modules?
Yes, the DS Series Laser Distance Sensors can operate in parallel with the ST100 Series Optical Data Transmission Modules without interference. This combination is ideal for automated warehousing or port systems, providing both precise positioning and stable data transmission.
What data bandwidth does the Optical Data Transmission Module support?
The ST100 Series Module supports 100 Mbit/s high-speed Ethernet communication, meeting the requirements of large data transmission, such as real-time video streams and diagnostic data.
Does the ST100 Series Module support bidirectional communication?
Yes, the ST100 Series Optical Data Transmission Module supports bidirectional data communication, allowing for simultaneous data transmission and reception to ensure real-time and efficient information exchange.
Does the reflectivity of the target surface affect the measurement results in long-distance laser measurement sensors?
Yes, the reflectivity of the target surface has a certain impact on measurement performance:
▪️High-reflectivity surfaces (e.g., reflective panels or white objects): Provide optimal measurement performance.
▪️Low-reflectivity surfaces (e.g., black objects): The effective measurement distance may be reduced, but the sensor can compensate through adjustable laser power or enhanced algorithms.
Related Products
Detection range: 2000 mm, 3000 mm
Material: Nickel-copper alloy
Connection type: 3pin/4pin with 2M cable
Detection distance: 30-150mm, 2M, 10M
Power supply voltage: DC12-24V
No-load current：9mA , 9mA, Reflection 11mA, reception 9mA
Connection method：Wire lead type (standard wire length 2m)
Output method: NPN/PNP+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm<1m
Reaction time: 50-200ms
Measure distance: 0.1-50m
By converting from the laser into electrical signals. determine various characteristics,distance, displacement, or position.
Detection range: 5000 mm, 15000 mm
Material: Nickel-copper alloy
Connection type: 3pin/4pin with 2M cable
DADISICKに質問する
こんにちは！当社の製品とソリューションについての回答を得るには、ここが最適な場所です。DADISICK 独自の 2,000 種類を超える製品に加え、お客様の特定の要件を満たす幅広いブランド交換製品も提供しています。弊社のセールスエンジニアは、設計・研究段階からモデル選定、現場指導、製品導入後の生産ライン運用まで、ビジネスのあらゆるレベルで包括的なサポートを提供する準備ができています。以下のフォームを使用してお客様のニーズをお聞かせください。できるだけ早くご連絡いたします。
- Ask DADISICK
- フルネーム
産業オートメーション セキュリティ ソリューション
光学、電気、機械製品の製品技術研究、開発、生産、販売、代理店を専門とする科学技術企業です。オプトエレクトロニクス製品の専門メーカーです。....詳細
