ホームページ / 全て / Safety Products / Laser Distance Displacement Sensor / GFL-Z Series /

GFL-Z400N-RS485 | Laser Beam Sensor | DADISICK

GFL-Z400N-RS485 | Laser Beam Sensor | DADISICK
GFL-Z400N-RS485 | Laser Beam Sensor | DADISICKGFL-Z400N-RS485 | Laser Beam Sensor | DADISICKGFL-Z400N-RS485 | Laser Beam Sensor | DADISICKGFL-Z400N-RS485 | Laser Beam Sensor | DADISICKGFL-Z400N-RS485 | Laser Beam Sensor | DADISICK

GFL-Z400N-RS485 | Laser Beam Sensor | DADISICK

カタログGFL-Z Series
ブランドDADISICK
製品の規格GFL-Z series | GFL-Z400N-RS485
Response time:Up to 1.5ms
Output typeRS485
Measuring center distance400mm
Measuring range±200mm
Repeatability400μm(Range: 200~400mm)/800μm(Range: 400~600mm)
Supply voltage12~24V DC±10%, pulsation P-P10%
更新時間2024/11/23
詳細情報
Laser Beam Sensor Measuring range specification
Species
Measuring 
center 30mm
Measuring 
center 50mm
Measuring 
center 100mm
Measuring 
center 200mm
Measuring
center type 400mm
Model
NPN output

GFL-Z50N
GFL-Z100N
GFL-Z200N
GFL-Z400N
Analog quantity output
GFL-Z30NM
GFL-Z50NM
GFL-Z100NM
GFL-Z200NM
GFL-Z400NM
RS485 communication
GFL-Z30N-RS485
GFL-Z50N-RS485
GFL-Z100N-RS485
GFL-Z200N-RS485
GFL-Z400N-RS485
Measuring center distance
30mm
50mm
100mm
200mm
400mm
Measuring range
±5mm
±15mm
±35mm
±80mm
±200mm
Repeatability
10μm
30μm
70μm
200μm
400μm(Measuring distance200~400mm)
800μm(Measuring distance400~600mm)
Straightness
±0.1%F.S.
±0.2%F.S.
±0.2%F.S.(Measuring distance200~400mm)
±0.2%F.S.(Measuring distance400~600mm)
Temperature characteristic
0.03%F.S./℃
illuminant
Red semiconductor laser Class 2
Maximum output :1mW, light beam 
wavelength :655nm
Beam diameter
About φ50μm
About φ70μm
Aboutφ120μm 
About φ300μm
About φ500μm
Supply voltage
12~24V DC±10%, pulsation P-P10%
Current consumption
Below 40mA (24V DC supply voltage), below 60mA (12VDC supply voltage)
Control output
<NPN output type >
NPN open collector transistor
●Maximum in￾ow current :50mA
●Applied voltage :30V DC below (control output -0∨)
●Residual voltage: less than 1.5V (in￾ow current 50mA)
●Leakage current: below 0.1mA
Output action
ON in light/ON in non-light can be switched
Short circuit protection
Equipped (automatic recove￾ type)
Analogoutput
Voltage analog output
(When alert :+5.2V)
Output range :0 to 5V
Output impedance100Ω
-
Output range:0~5V
Output impedance:
100Ω
-
Output range:0~5V
Output impedance:
100Ω
Current analog output
(Ale￾ :0mA)
Output range :4 to 20mA
Load impedance :300Ω or less
-
Output range :4 to 20mA
Load impedance :300Ω or less
-
Output range :4 to 20mA
Load impedance :300Ω or less
Mechanical parameters
Reaction time
1.5ms/5ms/10ms can be switched
External input
NPN No contact input Valid :0V to +12V DC Input impedance: about 10 kΩ
Protective construction
IP60
Degree of fouling
2
Operating ambient temperature
-10℃~+40℃(pay attention to do not condensation, icing), storage :-20℃~+60°C
Ambient humidity
35%~85%RH, storage :35%~85%RH
Use ambient light
Incandescent lamp: the illumination degree of the illuminated su￾ace is less than 3000lx
Service level
Below 2000m
Cable
With 0.15mm 5-core composite cable 2m
Material
Body shell: aluminum casting front cover plate: propylene base
weight
Approx. 35g(without cable), Approx. 85g(with cable)
Applicable specification
Compliance with EMC directive
(Note): When the measurement conditions are not speci￾ed, the use conditions are as follows: power supply voltage :24V DC, 
ambient temperature :+20℃, reaction time :10ms, analog output value of the measurement center distance. Object Object: White paper.
DIMENSION                                                                                                                                                                                           
Dimension of laser sensor for laser sensor light
Accessory installation diagram                                                                                                                                                                  
Accessory installation diagram of GFL-Z series laser distance sensor working principle
WIRING DIAGRAM                                                                                                                                                                                    
Wiring diagram
Wiring diagram of GFL-Z series laser proximity sensors
DOCUMENTS & DOWNLOADS                                                                                                                                                                  
CATALOGUE

GFL-Z series laser displacement sensor
GFL-Z Series instructions
3D
GFL-Z series.3D-STP
評価
  • 読み込んでいます...
関連製品
    求める品の情報をご連絡ください
    *Email
    お名前
    *題名
    *内容
    アップロード
    • .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf のみをサポート、最大 20M