安全センサーの完全交換を迅速に発送

言語:

産業オートメーションセキュリティソリューション

A professional manufacturer specializing in replacement services for safety sensors.

Name: OX-D2/OX-D3｜The Safety Interlock Switches with locking function｜DADISICK
Brand: DADISICK
SKU: 18408158
Rating: 4.75 (10 reviews)

As a safety sensor manufacturer, we are committed to providing top-quality replacement services with superior performance at competitive prices, tailored to meet your needs.

ホームページ / 全て / Safety Products / Safety Interlock Switches Devices / OX-D2/OX-D3 Series /

OX-D2/OX-D3｜The Safety Interlock Switches with locking function｜DADISICK

カタログ	OX-D2/OX-D3 Series
ブランド	DADISICK
製品の規格	OX-D2 & OX-D3
Full range of gold-plated contacts	Configure 5 contact structures
Suitable for standard and small loads	Adjust up to 8 directional key operation holes
IEC/EN60947-5-1	GB14048.5-2017
更新時間	2024/11/23

すぐ連絡

お気に入り

詳細情報

Safety Interlock Switches Performance Specifications
Applicable standard	IEC/EN60947-5-1/GB14048.5-2017
Protection level*1	IP65/IP67 (EN60947-5-1 key operation hole)
Service life*2	More than 1 million machinery/more than 300,000 times of electricity
Rated insulation voltage (Ui)	400V
Rated impulse withstand voltage (Uimp)	4KV
Rated open thermal current (Ith)	8A
Use category	AC-15
Rated working voltage (Ue)	AC400V
Rated operating current (le)	2A
Rated limited short-circuit current	1000A
forced disengagement force	≥60N
Forced breakaway distance	≥10mm
Operating frequency	≤ 20 times/minute
Ambient temperature	-20°C~60°C (not freezing)
Environment humidity	Below85%RH
1. The above values are initial values. 2. The contacts of the switch are shared by standard and small loads, but the contacts that operate on a certain load cannot be connected to a load with a smaller capacity for use. Failure to do so may result in damage to the contact surface and reduced contact reliability. 3. Although the switch housing can prevent dust or water from entering, do not use the switch where foreign matter such as powder, water or medicine may enter the keyhole of the switch head, otherwise wear, damage or malfunction of the switch may occur. 4.The conditions for durability are an ambient temperature of 5°C to 35°C and an ambient humidity of 40% to 70%.